|
 | |
|
|
 |
GYP-CRETE FLOOR UNDERLAYMENT
This product is the industry standard for use over wood sub floors
in multi family construction, providing sound and fire control. Its
smooth surface is ideal for finished floor goods.
DOWNLOAD INFO
GYP-CRETE® 2000 3.2K FLOOR UNDERLAYMENT
Designed for use in single-family and light commercial
construction, it is also ideal for renovation projects, with
compresive strengths up to 3,200 psi (22.1 MPa)
DOWNLOAD INFO
DURA-CAP FLOOR UNDERLAYMENT
Ideal for smoothing conrete slabs or precast planks ¾" in new or
renovation projects, this product covers old floor coverings,
including vinyl asbestos tile. It can be poured from 3 inches deep to
a featheredge, with compressive strengths up to 3,800 psi (26.2 MPa)
DOWNLOAD INFO
THERMA-FLOOR FLOOR UNDERLAYMENT
This product is designed specifically for radiant floor heating
systems and use over hot water tubes or electric cables. It provides
the ideal thermal mass, plus fire and sound control.
DOWNLOAD SALES SHEET
DOWNLOAD COMPARISION SHEET
COMMERCIAL TOPPING
This product is poured from a featheredge to 3", in new
construction or renovation projects, achieving compressive
strengths of 4000 to 4500 psi and pours over VAT, VCT, terrazzo
or ceramic, with no shotblasting required.
DOWNLOAD INFO
LEVEL-RIGHT FS-10 SELF-LEVELING FLOOR UNDERLAYMENT
This product is ideal for thin-topping, 0 - 3/8" (0-10 mm)
applications over concrete. It provides a smooth, level new surface
that dries fast to keep your job on schedule, and to allow for
placement of floor goods soon after application, attaining up to
7200 psi (50 MPa).
DOWNLOAD INFO
LEVEL-RIGHT PLUS MULT-PURPOSE SELF-LEVELING FLOOR UNDERLAYMENT
Ideal for thin or thick topping applications over concrete, this
product levels, smooths and repairs, all with superior speed and a
high-strength set. It's the superior solution for 0-1½" (0-38 mm)
thin-topping applications. Dries fast to keep your job on schedule.
DOWNLOAD INFO
LEVEL-RIGHT SELF-LEVELING FLOOR UNDERLAYMENT
This is specially formulated high-strength, cementitious underlayment
can handle any floor leveling challenge - without shotblasting or
scarifying. With compressive strenghts up to 5,500 psi (38 MPa), it
is the perfect solution for problem floors in large projects or for
small repair jobs.
DOWNLOAD INFO
ACOUSTI-MAT II
The ultimate sound deadening UL listed system, Acousti-Mat is
the cost-effective solution to "noise" complaints, even with ceramic
and wood floors. The system actually isolates sound waves,
reducing transmission of impact and airbourne sound up to one half.
DOWNLOAD INFO
LEVEL-RIGHT WEARTOP
A self-leveling portland cement-based topping for resurfacing
concrete floors, Level-Right Wear Top is installed over interior
concrete subfloors to provide level and smooth floors for retail,
commercial, light manufacturing areas and all areas requiring a
hard, smooth, flat concrete surface. Level-Right Wear Top is coated
with a Maxxon approved sealer just 2 hours after installation except
when an epoxy or other floor covering will be installed.
DOWNLOAD INFO
ENKANSONIC
Creating sound-rated floors with the high IIC and STC level
required by ICBO, UBC and FHA for luxury developments,
Enkansonic is a durable and proven solution - the only mat that has
been tested after 10 years of use. (Enkasonic retained 97% of
original thickness, was a pliable as a new roll, and performed
equally to newly manufactured roll.) It increases IIC and STC
levels up to 12 points over wood frame, and IIC up to 20 points
over concrete.
DOWNLOAD INFO
ACOUSTI MAT 3
is the sound deadening solution for floor systems that have been
impossible to control! Now you can put an end to those "noise"
complaints - even with open beam, concrete slab and conventional
wood frame systems. Acousti-Mat® 3consists of a nylon core of
fused, entangled filaments attached to a non-woven fabric, similar
to Maxxon's Acousti-Mat II, only three times thicker. It's a proven
fact that larger the air space, the greater the sound control -
and this system creates the largest air void of any sound control
mat. The results - up to an additional 5 db improvement in impact
noise control, over the already high control provided by
Acousti-Mat II. This is a 15 IIC (impact noise) rating point
improvement over a conventional wood frame construction! And 10
points represents a doubling of performance and would sound
twice as good to the human ear. The additional mass of the floor
system also increases the STC (airborne noise) rating.
DOWNLOAD INFO
ACOUSTI-MAT® CLP
A unique blend of polymeric fibers of various shapes and sizes, this
product is a proprietary mix designed to provide excellent
reductions in sound transmission and sound reflection. The mat is
bound together through a blend of polymer adhesives, which
provide a tough durable mat with water repellant features.
The Acousti-Mat CLP system can meet the 50 IIC sound control
rating required by the International Building Code, before any floor
goods are installed. The Acousti-Mat CLP is attached to the
concrete subfloor, then topped witha Maxxon Underlayment. The
Acousti-Mat CLP is permanently encased in the underlayment, so
when the floor goods are changed, the sound control system
remains intact.
DOWNLOAD INFO
ADHESIVE SPEC
CLP CROSS SECTION
CSM-CRACK SUPRESSION MAT
A reinforcement product used in conjunction with Maxxon
Underlayments for crack suppression, CSM consists of a nylon
core of fused, entangled filaments and a geotextile fabric bonded to
one side.
DOWNLOAD INFO
MER-KRETE FRACTURE-GUARD 5000®
A one step mold resistant anti-fracture membrane composed of a modified latex elastomer, this product produces a monolithic surface. Its thin section (approx. 30 mils) and excellent elongation will inhibit the transferral of cracks from the substrate to the finished surface. The membrane is installed in a semi-fluid state and can be applied to any form or irregular shape.
DOWNLOAD INFO
MAXXON DPM (Damp Proof Membrane)
Maxxon DPM is a unique 2-component, moisture tolerant, high density, chemically enhanced epoxy product which prevents the passage of water vapor and moisture through concrete floors and walls on or below grade. DPM eliminates delamination of adhesives, floor coverings and coatings. DPM also prevents capillary infiltration of oil or other chemicals from the ground and can be used to treat oil contaminated slabs.
DOWNLOAD INFO
|  |
|
| |
|
|
|
|
|
|
|
|
 |
|
